Whatman Polycap 36TF Capsule Filter 6711-3604, 0.45um
$90.00
Whatman Polycap 36TF Capsule Filter, 0.45um, Non-Sterile, PTFE Filter Membrane (Teflon)
For use with solutions containing aggressive solvents
Whatman Polycap 36TF Capsule Filter, 0.45um, Non-Sterile, PTFE Filter Membrane.
Whatman GE Catalog No. 6711-3604
Polycap TF 36, 0.45 µm, with MNPT inlet and 3/8 in SB outlet (1 pc)
| Complete Packsize | 1 Piece |
| Housing | Polypropylene (PP) |
| Operating Pressure Max. | 4.1 bar (60 psi) |
| Vent | On inlet |
| Flow Direction | Supported bidirectionally. Certain applications may require orientation, i.e., vents. Reverse flow only for low pressure applications. |
| Sterilization | May be autoclaved at 121°C for 20 minutes. Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving.Compatible with EtO sterilization. |
| Sealing | Heat-fused |
| Support System | Polypropylene (PP) |
GE’s Whatman Polycap TF filters are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing for use with organic solvents and chemically aggressive solutions.
PTFE Membranes: PTFE membrane is hydrophobic and will not allow water (aqueous solutions) to pass without high pressure. This pressure is called the Water Breakthrough Value (WBT) Value, and changes with the pore size of the membrane. Aqueous solutions may be filtered if the membrane is initially "wetted" with alcohol or other appropriate solvents.
6711-3604
Comments (0)
No customer reviews for the moment.
Whatman Polycap 36TF Capsule Filter, 0.45um, Non-Sterile, PTFE Filter Membrane (Teflon)
For use with solutions containing aggressive solvents